Basic Info.
Product Description
Product Propeties
2. Aging resistance
3. High insulation
4. Heat and low temperature resistance
5. Non stick
6. Non toxic
7. High lubrication
Item | Unit | Typical Vale |
Product name | 100% virgin PTFE rod | |
Material | PTFE resin | |
Color | White/Black | |
Pattern | Smooth roll | |
Common Diameter | mm | 10-300 |
Standard Length | m | 0.5-1.0 |
Density | g/cm3 | 2.1-2.3 |
Operating Temp. | ºC | -180~260 |
Tensile Strength | Mpa | 25-45 |
Elongation | % | 150-400 |
Dielectric Strength | KV/mm | 18 |
Material Introduction
PTFE molded sheet is manufactured by molding method with PTFE granular resin. In fluoroplastics, PTFE got the most consumption and was used widely. It's an important material in variety of fluoroplastics. PTFE exhibits astonishing chemical resistance. This self-lubricating material provides a low friction coefficient, and is ideally suited for the manufacture of corrosion-resistant gaskets & seals.
Name: PTFE (polytetrafluoroethylene)
Colors include: White
Types: sheets, rod
Characteristics:
♦ Superior endurance in corrosion
♦ Non-flammable,limited oxygen index is under 90.
♦ Low friction coefficient
♦ Non-viscous, Self-lubricating
♦ Superior endurance in high & low temperature, can be used -200~260ºC
♦ High electrical insulation
♦ Atmospheric aging resistance
♦ Low permeability, good gas barrier property
♦ Good physiological compatibility and anti-thrombotic
